In the majority of situations, most individuals spend quite a lot of money purchasing their lift truck. Therefore, it is really essential to take proper care of it in order to protect your investment well into the long run. It is a great idea to know the procedures which are undertaken in the maintenance and care of this piece of machinery.
One of the best ways to tell how good the engine is working is by starting the lift truck up and listening closely to see how it works. Like for example, if there are any misses or knocks, the machine is faulty and this must raise some concerns. In addition listen closely for any squealing noise which come from the belts as these noises will provide you with a wealth of information.
Some of the main components needing attention during maintenance include the gauges, horn, safety warning devices, the lights and the overhead guard. Any faulty parts or burnt out light bulbs have to be replaced as soon as they are noticed. It is also essential to inspect the wiring.
After the above components have been checked thoroughly, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each battery cell must be checked in order to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters should be regularly replaced. Before fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
After the oil change is finished and the filters have been replaced, a visual inspection of the drive axle has to be carried out. If there is a grease fitting on the axle make sure to apply some grease. Check the engine belts for any frays or cracks. If you find any, fix the issue accordingly. Then, check every other part of the machinery including the wheels. If any kind of issue or fault is detected, be sure to address it immediately in order to make sure the machine is running at its safest and optimum levels.